43
12.2.2 By Execution Command
Refer to paragraph
M.3
on
Appendix M
for how to execute and recall a Customized Settings PLU.
12.3 Clear Customized Setting PLU
12.3.1 By Instrument keyboard
1.
If more than one weighing platform is used, shift to the preferred platform # (under which the log
PLU is save) by pressing
[PF/Set]
.
2.
Long press
[PLU]
then
[CE/x10]
.
3.
Instrument displays
Clear
on LCD1.
4.
Enter the preferred Customized Setting PLU number (01 ~ 99) to clear through numeric key then
press
[Print/M+]
.
5.
Instrument displayed
Done
on LCD3.
At this point, current operation settings/parameters are cleared from PLU.
12.3.2 By Execution Command
Refer to paragraph
M.3
on
Appendix M
and enter 00 for PLU number.
12.4 Quit Current Customized Setting PLU Effect
Procedures: -
1.
During normal operation status, press
[PLU]
.
2.
Instrument displays
Recall
on LCD1.
3.
Enter
00
through numeric key then press
[Print/M+]
.
At this point,
Customized Setting Indicator
disappears and instrument is running according to system
setting.
13. Data Output Protocols & Formats
This instrument supports various PC data output protocol and output formats. Refer to below paragraphs and
paragraph 8
for details and setting procedures.
13.1 PC Output Protocols
•
9 predefined PC Output Protocols. Refer to
Appendix A
for details.
•
1 customized Output Format. Refer to
Appendix B
for details.
Note
: - RS485 is not a suitable transmission mode for PC output protocol unless machine ID is set = blank in
internal function F18.
13.2 Data & Print Formats
13.2.1 Predefined Output Formats
5 predefined output formats (Lab1 ~ Lab 5). Refer to below Appendixes for details.
•
Lab 1 Output Format (
Appendix C
)
•
Lab 2 Standard Output Format (
Appendix D
)
•
Lab 3 Output Format (
Appendix F
)
•
Lab 4 Output Format (
Appendix G
)
•
Lab 5 Output Format (
Appendix H
)
Содержание DC-10
Страница 2: ...2 ...
Страница 11: ...11 3 Panel and Keys ...
Страница 97: ...Fidelity Measurement Co Ltd www fi measurement com e mail info fi measurement com ...
