Fidelity Electronics 19eA, Руководство по эксплуатации

Страница: 42 / 62

42
16.2 Label Programming
Prompt commands, information description, working mode and suggested length on label are listed on the below table .
Caution
: - Do not combine information of different working mode on the same label.
16.2.1 Label programing information table
Prompt Command
53
Description
Working
Mode
54
Suggested
Length
LP50 &
TSC
Sbarco
K 4B Date All
10
L 4C Time All
8
f 66 Operator Number All
4
d 64 Machine ID All
4
e 65 Machine Group Number All
2
Z 5A Customer Code All
18
b 62 Product Code All
18
S 53 LO limit
55
All
11
R 52 HI limit
56
All
11
T 54 Comparison Result All
11
Q 51 Gross weight All
10
qq 71 Gross weight without unit or decimal All
6
P 50 Tare weight All
10
pp 70 Tare weight without unit or decimal All
6
O
4F Net weight
All
10
oo 6F Net weight without unit or decimal All
6
M 4D
No. of accumulated transaction (8 digits with
leading space)
All
8
mm 6D
No. of accumulated transaction (6 digits with
leading zero)
All
N 4E
Total accumulated weight
All
6
nn 6E
Total accumulated weight without unit or decimal
All
U 55 Number of piece Piece Count
11
V 56 Average piece weight Piece Count
6
c 63
Total accumulated pieces
Piece count
11
Y 59 Weight hold
Animal
Weighing
11
yy 79 Weight hold without unit or decimal
Animal
Weighing
6
a 61 Peak Value Peak 10
53
Prompt commands are case sensitive.
54
"All" means the information is good for all working modes.
55
Each working mode has its own Lo Limit format (weight for weighing mode& auto tare accumulation; pieces for piece count mode). If Hi Limit
has to be printed, set Hi Limit value under the preferred working mode.
56
Each working mode has its own Hi Limit format (weight for weighing & auto tare accumulation mode; pieces for piece count mode). If Hi Limit
has to be printed, set Hi Limit value under the preferred working mode.