Fidelis Network Collector SA Rev-1 Series, Быстрый старт

Страница: 4 / 9

QUICK START GUIDE
Fidelis Network® Collector SA
www.fidelissecurity.com
©Fidelis Cybersecurity
4
4. Collector SA Networking Environment
The Collector SA appliances use the Admin network for service and inter-node communication. The
appliances also offer the IPMI/iLO interface for optional out-of-band management of the appliance.
Use the tables below to identify the count and type of switch ports necessary to support the number
of appliances for your deployment.
Admin Network
The Admin network connects the Collector SA to the Fidelis Network sensors and CommandPost/K2
systems.
Appliance Switch Port Type Qty.
Collector SA GbE - RJ45/Cat5+ (copper twisted pair) 1
iLO / IPMI Network
Optional network for remote/out-of-band server administration.
Appliance Switch Port Type Qty.
Collector SA GbE - RJ45/Cat5+ (copper twisted pair) 1
5. Appliance — Logical Network Configuration
Each physical connection must be assigned logical network information. Build a table of the logical
information for each appliance that you can reference during configuration. Appendix A has a
worksheet you can use to build your own Network Configuration table that you will reference multiple
times during setup.
Sample Network Configuration Table
Network Setting Assignments
Interface: Admin/eth0 iLO/IMM
Hostname (FQDN) CollectorSA-1.organization.net.
Static IP Address 10.1.2.3 10.2.3.4
Subnet Mask 255.255.255.0 255.255.255.0
Gateway 10.1.2.1
Proxy Server 10.5.6.7
DNS Servers 8.8.4.4, 8.8.8.8
NTP Servers 0.pool1.ntp.org.
Time Zone UTC (+0)