FibroLAN Falcon-RX/812/G/A, Руководство пользователя

Страница: 100 / 333

Falcon R-Class | User Guide
100
and integrity of data over an insecure network. The goal of SSH was to replace the earlier rlogin,
TELNET and RSH protocols, which did not provide strong authentication or guarantee confidentiality
Web GUI: Configuration > Security > Switch > SSH
Figure 4-67: SSH Configuration
Table 4-63: Authentication Method Configuration Parameters
Mode Indicates the SSH mode operation. Possible modes are:
•
Enabled : Enable SSH mode operation.
•
Disabled : Disable SSH mode operation.
4.8.1.5 HTTPS Configuration
HTP is an acronym for H ypertext T ransfer P rotocol. It is a protocol that used to transfer or convey
information on the World Wide Web (WWW).
HTTP defines how messages are formatted and transmitted, and what actions Web servers and
browsers should take in response to various commands. For example, when you enter a URL in your
browser, this sends an HTTP command to the Web server directing to fetch and transmit the
requested Web page. The other main standard that controls how the World Wide Web works is
HTML, which covers how Web pages are formatted and displayed.
Any Web server machine contains, in addition to the Web page files it can serve, an HTTP daemon,
a program that is designed to wait for HTTP requests and handle them when they arrive. The Web
browser is an HTTP client, sending requests to server machines. An HTTP client initiates a request by
establishing a Transmission Control Protocol (TCP) connection to a particular port on a remote host
(port 80 by default). An HTTP server listening on that port waits for the client to send a request
message.
Web GUI: Configuration > Security > Switch > HTTP
Figure 4-68: HTTPS Configuration