58/76
Operating instructions WPM Gateway IoT
WPM Gateway Administration
9.3
Setting the filter for Press mode
Various threshold values can be set to compensate for short-term fluctuations in the sensor val-
ues. In this case, an alarm or warning is only issued at the outputs of the WPM Gateway when
the threshold values have been exceeded.
Open view:
Main menu => Administration => Press mode filter
Fig. 9-3 Setting the filter for Press mode
Fields
Name
Meaning
Threshold values based on the number of messages
Warning
threshold
Accepted number of warning messages before a warning is emitted.
Alarm thresh-
old
Accepted number of alarm messages before an alarm is emitted.
Threshold values based on a time delay
Warning
delay
Accepted time period in warning status before a warning is emitted
Alarm
delay
Accepted time period in alarm status before an alarm is emitted.
Save the set threshold values on the Gateway.
Save
