FIBRO 2480.00.91.40, Руководство по эксплуатации, Страница: 20 / 40

20/40
Operating instructions EtherCatWPM Gateway Fieldbus
Operation
6.3.2 Pairing of the WPM data holder and WPM Gateway
In normal operation, a WPM Gateway monitors exactly one configured pressing tool.
This pressing tool must be made known to the WPM Gateway.
If a WPM system is equipped with a WPM Gateway, the login button on the
WPM data holder serves as manual confirmation for the manual pairing.
Inlets for controlling the pairing:
The digital inlet D0_IN switches the WPM Gateway to pairing mode. In this operating mode, the
WPM Gateway waits for the confirmation of a WPM data holder, which is triggered by the button
“Login” being pressed. The digital outlet D3_OUT makes a connected display blink.
X72 plug 5-pole, pin, M12, A Digital inlets Function
Pin 1 D0_IN +24V,
Digital inlet 0 Key switch for release
Pairing initiated by
the WPM data holder.
High is active.
Pin 2 D1_IN +24V,
Digital inlet 1 Do not assign
Pin 3 D2_IN +24V,
Digital inlet 2 Do not assign
Pin 4 D3_IN +24V,
Digital inlet 3 Do not assign
Pin 5 0V_DIN Reference potential
for digital inlets 0-3 Reference potential,
galvanically isolated