FIBRO 2480.00.91.40, Руководство по эксплуатации

Страница: 16 / 40

16/40
Operating instructions EtherCatWPM Gateway Fieldbus
Commissioning
5.2.5 Voltage supply
The nominal voltage supply is +24V DC +/- 20%.
Recommended connection:
•
Line
• M12 socket
• 5-pole, A-coded
• Maximum line length: 30 metres
NOTICE
Electrical fuse
Install line protection to protect the device .
 Destruction of device in the event of overload.
 Destruction in the event of an error.
5.2.6 Deactivated - USB device BT LE 4.0 Interface
The USB interface works only in connection with the WPM configuration software - as an alter-
native to a FIBRO USB Bluetooth LE stick.
5.2.7 Ethernet interface
The Ethernet interface has no function and should not be connected!
1
2
4
5
3
X01 plug M12 pin
4-pole, A-coded Voltage
supply Function
Pin 1 +24V +24V DC +/- 20%
supply Voltage supply
Pin 2 +24V +24V DC +/- 20%
supply Voltage supply
Pin 3 0V 0V supply Reference potential
Pin 4 0V 0V supply Reference potential
X28 plug 4-pole, pin, M8 USB device Function
Pin 1 USB_5V Inlet. USB host
Detection Detecting a
connected PC
Pin 2 USB_DM USB signal is nega-
tive USB data signal
Pin 3 USB_DP USB signal is positive USB data signal
Pin 4 USB_GND USB GND Reference potential, galvanical-
ly connected