FIBRO 2480.00.91.40, Руководство по эксплуатации

Страница: 11 / 40

Operating instructions EtherCatWPM Gateway Fieldbus
11/40
Commissioning
5 COMMISSIONING
5.1 Preliminary conditions
The FIBRO gas springs are filled with nominal pressure.
The FIBRO gas springs in the pressing tool are equipped with FIBRO WPM pressure sensors.
The pressing tool is equipped with a WPM data holder.
WPM data sensors and WPM data holders are equipped with lithium metal batteries.
Pressing tools with WPM pressure sensors and WPM data holders are properly configured us-
ing
WPM configuration software.
5.2 Electrical connection
NOTICE
Electrical connection by specialist staff
Specialist training required.
System knowledge required.
 The WPM Gateway is not functioning.
 Fault in the system.
 System and tool damaged.
NOTICE
Electrical fuse
Install line protection to protect the device .

Destruction of device in the event of overload.

Destruction in the event of an error.