The copyright of this document is owned by Fibocom Wireless Inc., and the document shall not be replicated without approval.
SC806Hardware User ManualPage13 of 70
2
Product Overview
2.1
Description
Fibocom’s SC806 module is a smart module based on the Qualcomm MSM8909 platform. The SC806 integrates
core components such as Baseband, EMCP, PMU, Transceiver, and PA to support multi-standard long-distance
communication modes such as FDD/TDD-LTE, WCDMA, TD-SCDMA, CDMA, CDMA2000-EVDO, GSM, and
WIFI/BT short-distance wireless transmission technology. It supports GNSS wireless positioning technology.
SC806 is embedded with Android operating system, and has various interfaces such as MIPI/USB/UART/SPI/I2C.
It is the optimal solution for the core system of wireless smart products.
The SC806 module supports multiple formats and frequency bands. The corresponding standard and frequency
band are as follows:
Table1SC806-AM-00 Supported band
Mode
Band
WCDMA
Band 2/4/5
FDD-LTE
Band2/4/5/12/13/17
WIFI802.11 a/b/g/n
2412-2462 MHz
，
5180-5825 MHz
BT4.1 LE
2402-2480 MHz
GNSS
GPS /GLONASS /BeiDou
The SC806 is a module with 210 pins, including 146 LCC pins and 64 LGA pins. The size is 40.5mm × 40.5mm ×
2.8mm. It can be embedded in various M2M products through welding plate. It is very suitable for the development
of mobile devices such as on-board computers, multimedia devices, smart homes, and Internet of Things devices.
2.2
Main Performance
The following table describes the detailed performance parameters of the SC806
Table2Main performance parameters
Performance
Description
Power
DC 3.3-4.5V, typical voltage: 3.8V
Application CPU
Qualcomm’s® MSM8909:Quad-ARM®Cortex™-A7application processors
up to 1.1GHz + 512KB L2 cache
Multimedia CPU
QDSP6 v5 Core
Operating frequency691.2MHz
768KB L2
