©
Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
32
Sensus FPA Installation Manual
150-00006.01.04
6.2
Changing the Local/SHH IP Address
6.2.1
Changing IP Address from the LCD screen
Sensus devices ship from the factory with DHCP enabled, which allows the device to be auto-
discovered by AllPath Director. To change the IP of the Sensus, follow these steps:
1.
Select the Settings Panel on the main menu of the screen
2.
Login with username (default: LocalAdmin) and password (default: Password1)
3.
Select the Interface Config panel, and navigate to
the second page. Set DHCP to “Off”
4.
Input the desired IP, Netmask, Router/Gateway, and Domain Name Server into the available
fields
Figure 6-2: Input New IP Information
5.
Navigate to the last page, select the
“Set new address” button, and select “Confirm.” The IP
address will now be updated
