6
2 Getting started
2.1 FIBARO system wizard
When you log in to the Home Center for the first time you will see FIBARO System Wizard.
IMPORTANT:
In order to use all system functionalities,
it’s
required
to complete the wizard.
To start configuring your system click Configure.
The system will ask you to change your local login details such as e-mail address and password. It is
recommended to do that for your smart home safety.
IMPORTANT:
When you update the account, it will change the
Super User
login of your Home
Center. The Super User is the
ONLY
account with all
administrator rights
to configure the Home
Center. Please make sure that you store these credentials safely!
Enter your e-mail address and password. Make sure you entered active e-mail address. Check your e-
mail inbox and enter your 10-digits verification code. Then click Confirm.
If you didn’t receive your verification code click Resend.
The system will ask you if you want your devices to alarm you when something is happening. Enter a
pin code which will arm and disarm your devices. You may enable/disable the alarm panel later.
Enter the name of your home. Your configuration is completed.
