FIBARO Home Center HC2, Руководство по установке

Страница: 15 / 20

15
2.8 FIBARO Home Center App (iOS/Android)
For Home Center App to work properly, the Home Center gateway must be configured. For the Home
Center to be configured properly, perform Wizard procedure in Home Center Configuration Interface.
Following steps are mandatory for full configuration:
•
Update the gateway to the newest firmware.
•
Configure the FIBARO alarm:
o
Set the user PIN.
o
Enable or disable it.
•
Set location of the gateway.
•
Set name of the gateway.
•
Add at least one room to the gateway.
•
Add at least one device to the gateway.
•
Connect the gateway to FIBARO ID and Remote Access.
Step-by-step instruction:
Download the Home Center App
•
iOS https://itunes.apple.com/app/id1421839464
•
Android https://play.google.com/store/apps/details?id=com.fibaro.homecenter
Make sure your devices is connected with the same WiFi network as the Home Center.
Open the app
Login with your FIBARO ID credentials
IMPORTANT: Local access credentials of the Home Center need to be the same as Fibaro ID
account!
Select Home Center in the list.
Now you can manage your Home Center through the Home Center App on your smartphone.
Other settings
It may happen that the IP-range of the router changed, or the router has no access to the internet. In
both cases we advise to check the solutions below to control the Home Center app:
Offline login
– Use this option when the Home Center is connected to the router and the router has
no internet access. You need to fill in the IP-address and Home Center credentials. The IP-address
can be found through FIBARO Finder or the router.
Changed IP-range
– The Home Center automatically detects when the IP-range changed. In case it
has no access to the internet you need to logout from the app and login offline again.