6
REMOVING THE DEVICE
Removing (Exclusion)
- Z-Wave device learning mode, allowing to
remove the device from existing Z-Wave network.
To remove the device from the Z-Wave network:
1. Make sure the device is within the direct range of your Z-Wave
controller.
2. Set the main controller into remove mode (see the controller’s
manual).
3. Use the included key to quickly triple click the button on the ther-
mostatic head.
4. The LED ring will start blinking white.
5. Wait for the removing process to end.
6. Successful removing will be con
fi
rmed by the Z-Wave controller.
NOTE
Removing the device
from the Z-Wave net-
work restores all the
default parameters of
the device.
i
#4: Removing the device
