16
actIvatIng scenes
7.4:
Resetting to factory defaults
Reset procedure allows to restore the device back to its factory set-
tings, which means all information about the Z-Wave controller and
user configuration will be deleted. Resetting to factory defaults does
not reset energy consumption memory.
i
Resetting the device is not the recommended way of
removing the device from the Z-Wave network. Use re-
set procedure only if the primary controller is missing or
inoperable. Certain device removal can be achieved by the
procedure of removing described.
1. Press and hold the service button to enter the menu.
2. Release service button when the device glows yellow.
3. Quickly click the service button to confirm.
4. After few seconds the device will be restarted, which is signalled
with the red colour.
8:
Activating scenes
The device can activate scenes in the Z-Wave controller by sending
scene ID and attribute of a specific action using Central Scene Com-
mand Class.
In order for this functionality to work, connect momentary or toggle
switch to the IN1-IN4 inputs and set parameters 20-23 to 2, 3 or 4
(depending on type of switch).
Scene IDs for inputs
Input
Scene ID
IN1
1
IN2
2
IN3
3
IN4
4
Attributes for actions
Action
Attribute
Switch clicked once
Key Pressed 1 time
Switch clicked twice
Key Pressed 2 times
Switch clicked thrice
Key Pressed 3 times
Switch held*
Key Held Down
Switch released*
Key Released
* Not available
for toggle switches.
Содержание FGRGBW-442
Страница 1: ...FIBARO RGBW CONTROLLER 2 FGRGBW 442 OPERATING MANUAL EN v1 0 ...
Страница 2: ......