FIBARO FG-WDSEU221-AS-8001, Руководство по эксплуатации, Страница: 9 / 40

9
InstallatIon
4.4: Assembling the device
i
When installing the device in the mounting box orient
the device with terminal screws going up or to the left
(for horizontal button position) to ensure button order.
i
The light effect might look different for covers other
than Walli. You can adjust colour and/or intensity of
the LEDs to suit the particular cover (using parameters 11,
12, and 13) or disable it by changing parameter 13 to 0.
When installing with FIBARO cover plates:
1. Insert the device with mounting frame into the mounting box and
secure with mounting claws and screws.
2. Snap the cover plate to the device.
3. Snap the switch button to the device.
When installing with GIRA cover plates:
1. Insert the device with mounting frame into the mounting box and
secure with mounting claws and screws.
2. Snap the new cover plate to the device.
3. Snap the switch button adapter* to the device.
4. Snap the new switch button to the device.