background image

RECIRCULATION

With cursor at 

v

, only circulation

of internal air is active.

IMPORTANT When the
temperature outside is very high,
recirculation accelerates the cooling
of the air. It is also particularly useful
when there is a high level of external
pollution (in queues, tunnels, etc.).
Extended use is not advised
however, especially with many
people on board.

IMPORTANT Do not use the
recirculation function on cold/rainy
days. This would result in greater
internal misting of windows, making
visibility and driving conditions
dangerous.

MANUAL CLIMATE
CONTROL

CONTROLS fig. 59

A - Knob to regulate the air

temperature (mixing hot and
cold air).

B - Cursor to activate air

recirculation, preventing the
entrance of air from the outside. 

C - Knob for activating the fan and,

when pressed,
activating/deactivating the
climate control system.

Climate control activation is only
permitted if the indicator on this
knob is located at 1, 2, 3 or 4 

-

,

and is indicated by the central LED
on the knob itself. When turned to

O

p

climate control activation is

therefore inhibited.

D - Air distribution knob.

fig. 59

F0X0033m

The system uses R134a
refrigerant fluid which
does not pollute the

environment in the event of
accidental leakage. 
Never use R12 fluid, which is
not compatible with the system
components.

68

Содержание Strada




































































































































































































Отзывы: