Fiat FIORINO, Руководство пользователя, Страница: 167 / 220

VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE
This is applied on the rear part of the
vehicle and contains the following data
fig. 184:
A Name of manufacturer
B Type-approval number
C Vehicle type identification code
D Progressive chassis number
E Maximum permitted weight of vehicle
fully laden
F Maximum permitted weight of vehicle
fully laden plus trailer.
G Maximum permitted weight on first
axle (front)
H Maximum permitted weight on
second axle (rear)
I Engine type
L Bodywork version code
M Spare part number
N Smoke opacity index (for diesel
engines)
CHASSIS MARKING
This is printed on the passenger
compartment floor, near the right front
seat.
Slide the hatch A fig. 185 forward to
access.
The marking includes:
type of vehicle;
chassis serial number.
BODYWORK PAINT
IDENTIFICATION PLATE
(For versions/markets, where provided)
This plate is applied inside the bonnet
and shows the following data fig. 186:
A Paint manufacturer
B Name
C Fiat colour code
D Respray and touch up code
ENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.
CYLINDER MARKING
42)
Each methane cylinder is identified in
the plant by information stamped on
the cylinder cone.
This stamp contains:
CNG ONLY (type of gas which it is
designed for: compressed natural
gas only);
DO NOT USE AFTER XX - XXXX
(cylinder expiry date: month - year);
FABER (the name of the cylinder
manufacturer);
XX / XXXX / XXX (serial number of
the cylinder);
XX L (rated capacity of the cylinder
in litres);
184
F0T0011
185
F0T0084
186
F0T0012
165