GETTING TO KNOW YOUR VEHICLE
63
NOTE:
Before closing the liftgate, make sure to be in
possession of the key because the liftgate will
be locked automatically.
C
ARGO
A
REA
F
EATURES
Removable Rear Shelf — If Equipped
To remove rear shelf, proceed as follows:
1. Disconnect the two links that support the
shelf at the eyelets.
Rear Shelf Support Links
2. Lift the rear part of the overhead luggage
shelf.
3. Clear the pins placed outside of the shelf,
and then remove the rear shelf pulling it
upwards.
4. The rear shelf can be stored in the cargo
area, or behind the front seatbacks.
Cargo Load Floor — If Equipped
The vehicle is equipped with a load floor that
can be adjusted as needed.
Position 1 (Lowered Position):
This position allows you to make the load floor
flat for ease of loading/unloading objects from
the cargo area. This position also makes it
possible to use the space below as another
compartment for storing fragile or smaller
objects.
Position 2 (Elevated Position):
When the rear seatbacks and front passenger
seat are folded flat, it creates space for objects
of long dimensions. This position is
recommended only when transporting objects,
then move the load floor back to position 1.
NOTE:
With a full size spare, the floor will be at the
elevated position.
Access To The Loading Floor
To access the double load compartment,
proceed as follows:
1. Lift up on the load floor handle.
Load Floor Handle
2. Place the desired objects inside the
compartment.
1 — Eyelets
2 — Links
2
21_FD_OM_EN_USC_t.book Page 63
