
PROGRAMMABLE FEATURES
Electronic Vehicle Information Center (EVIC)
•
Push the
MENU
button to enter the menu mode
.
•
Push the
UP
or
DOWN
arrow button to scroll through the menu settings
.
•
Once the menu setting is shown in the EVIC display push the
MENU
button to access
the setting and use the
UP
or
DOWN
arrow button to change the current
setting
.
Push the
MENU
button a second time to save the setting and return to menu
screen
.
•
Battery % Display
•
Button Volume
•
Stored Warnings
•
Tutorial
•
Connectivity ID
•
Restore Factory Settings
•
Exit Menu
Selecting An Option Of The Main Menu Without Submenu:
•
Briefly push the
MENU
button to select the main menu option to set
.
•
Push the
UP
or
DOWN
arrow button to select the new setting
.
•
Briefly push the
MENU
button to store the new setting and go back to the main
menu option previously selected
.
Selecting An Option Of The Main Menu With Submenu:
•
Briefly push the
MENU
button to display the first submenu option
.
•
Push the
UP
or
DOWN
arrow button to scroll through all the submenu op-
tions
.
•
Briefly push the
MENU
button to select the displayed submenu option and to open
the relevant setup menu
.
•
Push the
UP
or
DOWN
arrow button to select the new setting for this sub-
menu option
.
•
Briefly push the
MENU
button to store the new setting and go back to the previously
selected submenu option
.
•
Push and hold the
MENU
button to return to the main menu (short hold) or the
main screen (longer hold)
.
NOTE:
The charging schedule is based on the date and time programmed in the EVIC
.
Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature settings
.
To change a setting:
1
.
Push the SETTINGS
button located on the right side of the display
.
2
.
Select a programmable feature you would like to adjust
.
ELECTRONICS
78