![background image](http://html.mh-extra.com/html/fiat/500e-2016/500e-2016_user-manual_2286428049.webp)
The drivers preferred units can be selected through the instrument panel settings if
equipped
.
Refer to “Understanding Your Instrument Panel” in the Owner’s Manual on the
DVD for more information
.
The speed decrement shown is dependant on the selected
speed unit of U
.
S
.
(mph) or Metric (km/h):
U.S. Speed (mph)
•
Pushing the SET (-) button once will result in a 1 mph decrease in set speed
.
Each
subsequent tap of the button results in a decrease of 1 mph
.
•
If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established
.
Metric Speed (km/h)
•
Pushing the SET (-) button once will result in a 1 km/h decrease in set speed
.
Each
subsequent tap of the button results in a decrease of 1 km/h
.
•
If the button is continually pushed, the set speed will continue to decrease until the
button is released, then the new set speed will be established
.
To Accelerate For Passing
Press the accelerator as you would normally
.
When the pedal is released, the vehicle will
return to the set speed
.
Using Electronic Speed Control On Hills
NOTE:
The Electronic Speed Control system maintains speed up and down hills
.
A slight speed
change on moderate hills is normal
.
On steep hills, a greater speed loss or gain may occur so it may be preferable to drive
without Electronic Speed Control
.
WARNING!
Electronic Speed Control can be dangerous where the system cannot maintain a con-
stant speed
.
Your vehicle could go too fast for the conditions, and you could lose con-
trol and have an accident
.
Do not use Electronic Speed Control in heavy traffic or on
roads that are winding, icy, snow-covered or slippery
.
OPERATING YOUR VEHICLE
47