Memory Feature
Both front seats have a memory feature, which can operate in two ways:
Memory Function Option 1 — Full Seat Back And Track Fore/Aft Position Memory:
After using the EZ entry function, the seatback angle and the Track fore/aft adjuster can
both re-lock into the position they were most recently adjusted to
.
This is accomplished if
the seat is moved fully rearward to its last fore/aft position on the tracks before the seat
back is returned upright
.
Memory Function Option 2 — Seat Back Only Memory:
After using the EZ entry function, the seat back may first be returned upright prior to
going back to the last fore/aft (memory) position on the tracks
.
This results in the seat
back memory being set only – The track will then be locked forward of its last set fore/
aft memory position
.
To then reset the fore/aft track memory feature (to reestablish
Memory Function Option 1), the seat has to be returned fully rearward to its last fore/
aft memory track position as described in Memory Function Option 1
.
Heated Seats
On some models, the front driver and passenger seats may be equipped with heaters in
both the seat cushions and seatbacks
.
The controls for the front heated seats are located
on the center instrument panel area
.
Push the switch once to turn on the
heated seats
.
Push the switch a second
time to shut the heating elements off
.
NOTE:
Once a heat setting is selected, heat will be
felt within two to five minutes
.
Heated Seat Switches
GETTING STARTED
37