9
For installation follow the scheme in
Fig. 1
.
-
Place the machine correctly on the
counter.
-
Find a suitable place and position for
the purifier n. 12 and connect the
purifier to tap n. 14 through tube n. 13
After having connected the purifier and
before connecting it to the machine, run
the water until it comes out clean, as new
purifiers can have some residues.
Connect the purifier to the filter-holder n.
16 by using the tube n. 11.
Carry out the electric connections by
joining the conductor nº. 5 to the circuit-
breaker nº. 2.
WORKING INSTRUCTIONS
To put into operation this machine simply connect the power switch, which is on the front panel,
the pump automatically starts filling the boiler water and simultaneously illuminates the green
flag. When the water reaches the minimum level, the green flag and goes off automatically
switches the heating boiler, connecting the flag orange, this will only shut down the boiler when
the water reaches the working temperature.
By connecting the switch will carry the power electronics of the machine, immediately
connecting the display which is the upper operation panel. The control electronics and
programming are attached (Supplement CV). "
HOT WATER AND STEAM
The machine has water and steam taps to make tea, warm milk or punch and make cappuccinos.
Before using the steam tap, open it for 1 or 2 seconds so that any residues from a previous use
can be washed away. It is also important to clean the rod with a wet cloth after having used it.
MAINTENANCE
BEFORE PERFORMING ANY KIND OF REPAIR, FIRST DISCONNECT THE MACHINE FROM
THE POWER SOURCE
1 - CLEANING
IMPORTANT: NEVER USE JETS OF WATER TO CLEAN THE MACHINE
Fig. 1
