L011-68
Rev.
E0
2018-70-18
Page
9
of
11
Surgical Procedure
1. Attach and handtighten standoffs to anchors.
2. Attach platform to standoffs with thumbknobs.
3. Attach the center hub to the platform using 2 screws at 90 degrees apart. Make sure the hub is completely seated in the
platform. The hub will sit approximately 1/8” above the top surface of the platform.
4. Use the burr hole entry marker with burr hole bushing and mark the skin and skull, then remove.
a
b
a
b
a
b
c
d
WARNING: Do not overtighten thumbknobs.
Only turn an additional 1/4 turn after
contacting mating surface.
Содержание WayPoint 66-WP-BKS
Страница 2: ...L011 68 Rev E0 2018 07 18 Page 2 of 11 ...
