L011-68
Rev.
E0
2018-70-18
Page
11
of
11
3.5
3.0
2.12
2.0
1.41
1.0
.71
3.5
3.0
2.12
2.0
1.41
1.0
.71
3.5
3.0
2.
12
2.0
1.
41
1.0
.7
1
3.5
3.0
2.
12
2.0
1.
41
1.0
.7
1
Track Selection:
Center positioner (9 distinct tracks):
Center track on target. Four parallel tracks with 2mm offset, ‘+’ configuration,
using positions A, C, E and G. Four parallel tracks with 2mm offset, ‘x’ configuration, using positions B, D, F and H.
Examples:
Center Positioner, ‘+’ configuration,
using any of positions A, C, E or G,
indicated by the black dots in the
offsetting chart below.
Center Positioner, ‘X’ configuration,
using any of positions B, D, F or H,
indicated by the red dots in the
offsetting chart.
3mm offset positioner (40 distinct tracks):
Five parallel tracks with 2mm offset, center track offset 3mm from origin,
in eight configurations using positions A-H.
Examples:
3mm Offset Positioner in the ‘G’ position,
indicated by the dark blue dots in the
offsetting chart.
3mm Offset Positioner in the ‘B’
position, indicated by the magenta
dots in the offsetting chart.
Offsets beyond the 10mm range of the positioner may be reached with the target offset hub.
Track Offsetting Chart
WARNING: The target offset hub creates a
new trajectory with target area orthogonally
offset 6mm from the original at the
microelectrode tip depth when the
physical drive reads 30mm. For platforms
with T<>30, the offset of 0.69mm per
10mm of drive travel may be used to
determine position at target depth.
WARNING: The entry offset hub creates a
new trajectory which is orthogonally offset
3mm from original at approximate entry
depth, and coincides with the original at
the microelectrode tip depth when the
physical drive reads 30mm. For platforms
with T<>30, the offset of 0.34mm per
10mm of drive travel may be used to
determine position at target depth.
Содержание WayPoint 66-WP-BKS
Страница 2: ...L011 68 Rev E0 2018 07 18 Page 2 of 11 ...
