FETtec FC G4-N v1.7, Руководство пользователя

Страница: 6 / 22

Page 6
Connection Layout bottom
8 pin ESC connector 1:
• VCC: Battery voltage out to supply FC power
• GND
• TLM/Onewire: ESC Telemetry signal to FC or Onewire signal pin (depending on
configuration)
•
ESC signal 1-4: ESC signal output for each ESC
8 pin ESC connector 2:
• VCC: Battery voltage out to supply FC power
• GND
• TLM/Onewire: ESC Telemetry signal to FC or Onewire signal pin (depending on
configuration)
• ESC signal 5-8: ESC signal output for each ESC (outputs ESC signal 1-4 if UAV type is
configured as BI, TRI, QUAD)