12
Changing side of the belt clip
Fix the belt clip
[3-1]
on the right or on the left side,
depending on which side you prefer to clip the cord-
less drill.
Remove the battery pack
[2]
.
Remove the belt clip
[3-1]
.
Insert the belt clip on the designated side.
Insert the battery pack
[2]
.
Charging the battery pack [4]
To charge the battery pack, put it on the retainer
[4-1]
on the charger.
To remove, press and hold the button
[4-2]
and
pull off the charged battery pack.
The LED
[4-3]
on the charger indicates the respec-
tive operating status of the charger.
Charger wall mount
The charger MXC has two elongated holes on its
back. It can be mounted on a wall using two screws
(e.g. round head or flat head screw with shank di-
ameter of 5 mm) (see Fig.
[5]
).
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Charging battery pack at maxi-
mum rate.
LED green - flashing slowly
Charging battery pack to 80% and
with reduced current.
LED green - lit continuously
Charging process is charged.
LED red - flashing
General fault indicator, e.g.
incomplete contact, short circuit,
defective battery pack, etc.
3-1
3
LED red - lit continuously
Battery temperature is outside
permissible limit values (0 °C to
55 °C).
1
1
2
klick
4-3
4-2
4-1
4
5
5mm
3 mm
85 mm
(3
11
/
32
“)
;
:
Do not attach to
inclined wall!
Содержание TXS
Страница 2: ......
Страница 3: ......
Страница 4: ...1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 9 1 10 1 11 1 1 8 ...
