Festool TI 15, Инструкция по эксплуатации

Страница: 17 / 48

16
– Do not leave flat battery packs in a charger dis-
connected from the mains power supply for long-
er than one month. There is a risk of total
discharge and the maximum power of the battery
pack may decrease.
– Store the battery pack in its packaging to reduce
the risk of short circuits..
– If LiIon battery packs are to be stored for long pe-
riods without use, they should be charged to 40 %
capacity (approx. 15 mins. charging period).
Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
any warranty claims. Machine wear or your own
personal workload may increase depending on the
application. Protect yourself and your machine, and
preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
To lock the Systainer
To connect two Systainers
Place one Systainer on the top of the other (Fig.
[9A] ).
The Systainers are connected and locked.
L
A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
Disposal
Do not throw the tool in your household waste!!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric tools must be collected separate-
ly and disposed of at an environmentally responsi-
ble recycling centre.
Turn the T-loc [9-1] to this position.
Turn the T-loc [9-1] to this position.
Turn the T-loc [9-1] to one of this posi-
tions (Fig. [9B] ).
open
lock
connect
connect
T-loc
9-1
A
9
B