CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 60745:
Drilling in metal
a
h
= 2.7 m/s
2
K = 1.5 m/s
2
Fastening
a
h
< 2.5 m/s
2
K = 1.5 m/s
2
The specified emission levels (vibration, noise)
–
are used to compare machines.
–
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
–
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3
Intended use
Cordless drill suitable
–
for drilling in metal, wood, plastics and
similar materials,
–
for screwing in and tightening screws.
–
intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci
dents caused by improper and non-inten
ded use; this also includes damage and wear
caused by continuous industrial operation.
4
Technical data
Cordless drill
T18+3
Motor voltage
18 V
No-load speed*
1st gear 0 - 450 rpm
1st gear 0 - 1500 rpm
Max. torque
Soft material (wood)
35 Nm
Soft material (wood)
50 Nm
Adjustable torque**
1st gear
0.8 - 8 Nm
2nd gear
0.5 - 6 Nm
Chuck clamping range
1.5 - 13 mm
Max. drill diameter
Wood
45 mm
Metal
13 mm
Tool holder in drill spindle
1/4’’
English
14
