Festool MFK 700 EQ, Инструкция по эксплуатации

Страница: 16 / 87

Accessories that rotate faster than the per­
missible level can rupture.
– Do not work on the power tool if its elec­
tronics are defective as this may lead to ex­
cessive speeds. You can tell if the electron­
ics are defective if there is no smooth start-
up, if it is not possible to regulate the speed
and in the event of generation of smoke or
the smell of burning from the machine.
–
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.
–
Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.3 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level L
PA
= 81 dB(A)
Sound power level L
WA
= 92 dB(A)
Uncertainty K = 1,5 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
a
h
< 2.5 m/s 2
K = 1.5 m/s 2
The specified emission levels (vibration, noise)
–
are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3 Intended use
The power tool is designed for routing wood,
plastic and similar materials.
The user is liable for improper or non-in­
tended use.
4 Technical data
Edge router MFK 700 EQ
Power 720 W
Speed 10,000–26,000 rpm
Max. speed (no-load) 26,000 rpm
Tool holder 8 mm
(optional: 6 mm, 1/4")
Max. routing diameter 26 mm/1"
Connection dia. d/e 27 mm
Weight as per EPTA procedure
01:2014:
2.0 kg
5 Parts of the device
[1-1] MFK 700 with large support router ta­
ble
[1-2] Side stop with guide bars and fine ad­
justment
[1-3] Extraction hood for large support rout­
er table with extractor connector
[1-4] Router table for edge veneer with fol­
lower roll and extraction hood (only in
SET items included)
[1-5] Gripping surface, locking for routing
depth
[1-6] Gripping surface
The specified illustrations appear at the begin­
ning of the Operating Instructions.
English
16