Festool 576779, Оригинальное руководство пользователя

Страница: 17 / 22

manufacturer can result in electric shocks
and/or serious accidents.
– Warning of harmful light radiation.
Do not look into the light beam for long
periods. Do not direct the light beam to­
wards other people or animals. Optical ra­
diation can damage the eyes – [4].
– Use a dust extractor when working with
dust.
– Only use tools and accessories which have
been approved by Festool for this power
tool. The use of tools or accessories which
have not been approved may increase the
risk of injury and seriously unbalance the
machine. This may decrease the quality of
the working results and accelerate wear on
the power tool.
2.3 Safety instructions when using long
drill bits
– Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if al­
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
– Always start drilling at low speed and with
the bit tip in contact with the workpiece. At
higher speeds, the bit is likely to bend if al­
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
–
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
2.4 Emission levels
Sound pressure level L
PA
, sound power level
L
WA
and uncertainty K measured in accordance
with EN 62841:
L
PA
[dB(A)]
L
WA
[dB(A)]
K [dB]
Screwdriv­
ing
73 84 5
Drilling 73 84 5
Impact
drilling
94 105 5
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
a
h
[m/s 2 ] K [m/s 2 ]
Screwdriving < 2.5 1.5
Drilling 3 1.5
Impact drilling 14 1.5
The specified emission levels (vibration, noise)
–
are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3 Intended use
Cordless impact drill suitable
–
for drilling in metal, wood, plastics and
similar materials,
– for impact drilling in brickwork, masonry
and stone,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use; this also includes damage and wear
caused by continuous industrial operation.
English
17