Festool 201908, Оригинальное руководство пользователя

Страница: 10 / 58

4 Technical data
Base frame UG-KAPEX KS 60
Dimensions in transport position (LxWxH) 23-47/64 x 24-7/8 x 35 7/16“
(603 x 632 x 900 mm)
Length of contact surface without trimming attachment 30-45/64“
(780 mm)
Length of contact surface with trimming attachment on one side 77-9/16 - 113-25/32“
(1970 - 2890 mm)
Length of contact surface with trimming attachment on both sides 125-13/64 - 197-41/64“
(3180 - 5020 mm)
Working height 35-7/16
(900 mm)
Max. load-bearing capacity UG-KAPEX KS 60/KA-UG 220.5 lbs/44.1 lbs
(100/20 kg)
Weight UG-KAPEX KS 60 without adapter plate 19 lbs (8.6 kg)
Weight UG-AD-KS60 9.5 lbs (4.3 kg)
Weight KA-UG-KS60 10.1 lbs (4.6 kg)
5 Scope of delivery
Base frameUG-KAPEX KS 60
[1-2] 1 x base frame with rollers (two-part)
[1-3] 1 x folding/fixed stirrup, handle
4 x screws M6x16
4 x D6.4 plain washers
1 x Allen key
Adapter plate UG-AD-KS60
[1-1]
1 x adapter plate
4 x screws M5x10
4 x D5.5 plain washers
1 x Allen key
Trimming attachment KA-UG-KS60
[2-1] Left trimming attachment KA-UG-
KS60-L
[2-2] Right trimming attachment KA-UG-
KS60-R
1 x Allen key
The illustrations specified are located at the be­
ginning and end of the operating instructions.
6 Assembly
6.1 Base frame UG-KAPEX KS 60
► Assemble the two-part base frame [1A].
► Fit the adapter plate to the tubular
frame [3], [4], [5], [6].
► Fit the compound mitre saw [7].
► Adjust the height of the sawing surface and
the base frame using the rotary spin­
dles [8-1] [8].
► Screw in the compound mitre saw [9].
Tip: carry out the following steps to align
the contact surface more quickly so that it
is horizontal:
▷ Align all four rotary spindles by eye.
▷ Precisely adjust the two front rotary
spindles [9-2] (those nearer the opera­
tor) using a spirit level.
▷ Screw in the two front rotary spindles
using hexagon screws and a hexagon
wrench [9-1]. Make sure so that the ro­
tary spindles [9-2]do not move in the
process.
▷ Readjust the two rear rotary spindles
using a spirit level [9-2] as they may
have twisted.
▷ Screw in the two rear rotary spindles
using hexagon screws and a hexagon
wrench [9-1]. Make sure so that the ro­
tary spindles [9-2] do not move in the
process.
English
10