Festo VTSA Series, Руководство пользователя

Страница: 32 / 166

1. Summary of components
1−16
Festo P.BE−VTSA−44−EN en 0601a
The vertical stacking components on the VTSA valve terminal
are marked by type codes. The code is marked on the side of
the component. Identification within the type code indicates
the function of the components, e.g. identification
R1
in type
code VABF−S4−1 R1 C2−C− 10, indicates that this component is a
P−pressure regulator with 10
bar
input pressure. You can
identify the vertical stacking components with the aid of the
following table. In the sales documentation and in the Festo
Configurator the valves are marked with an Indent. code.
Identifica
tion in the
type code Ident.
code Vertical stacking components
R1−...−6 ZF Pressure regulator plate for connection 1, input pressure 6 bar
R2−...−6 ZH Pressure regulator plate for connection 2, input pressure 6 bar
R3−...−6 ZG Pressure regulator plate for connection 4, input pressure 6 bar
R4−...−6 ZI Pressure regulator plate for connections 2 and 4, input pressure 6bar
R6−...−6 ZM Pressure regulator plate for connection 2, input pressure 6 bar, reversible
R7−...−6 ZN Pressure regulator plate for connection 4, input pressure 6 bar, reversible
R5−...−6 ZJ Pressure regulator plate for connections 2 and 4, input pressure 6bar,
reversible
R1−...−10 ZA Pressure regulator plate for connection 1, input pressure 10 bar
R2−...−10 ZC Pressure regulator plate for connection 2, input pressure 10 bar
R3−...−10 ZB Pressure regulator plate for connection 4, input pressure 10 bar
R4−...−10 ZD Pressure regulator plate for connections 2 and 4, input pressure 10 bar
R6−...−10 ZK Pressure regulator plate for connection 2, input pressure 6 bar, reversible
R7−...−10 ZL Pressure regulator plate for connection 4, input pressure 6 bar, reversible
R5−...−10 ZE Pressure regulator plate for connections 2 and 4, input pressure 10 bar,
reversible
F1B1 X Throttle plate for restricting the exhaust in channels 3 and 5