18
Festo — VTOP — 2021-07
Assembly
6.1.2
Assembly of valve terminal VTOP
1
2
3
5
4
Fig. 20: Assembly of valve terminal VTOP
1
Fail-safe module VOGI
2
Volume booster VOGM
3
Adapter plate VABA
4
Seal
5
Screw
1. Remove the transport locks.
2. Check that the seals on the modules are seated correctly.
3. Connect the modules correctly.
4. Apply the screws and tighten evenly. Tightening torque: 10 Nm ± 20%
6.2
Attachment
6.2.1
Attaching valve terminal VTOP
The valve terminal VTOP is attached to the pneumatic drive via the adapter plate VABA.
•
Mount the adapter plate VABA to the pneumatic drive
è
Assembly instructions for adapter plate VABA.
The linear drive DFPI -...- E-NB3VM12 is delivered with the adapter plate VABA mounted on the
pneumatic drive at the factory.
