Festo VMPA-FB-PS Series, Руководство пользователя

Страница: 26 / 96

1. MPA pneumatic modules
1−12
Festo P.BE−MPA−ELECTRONIC−EN en 0804NH
Note that MPA electronic modules may only be supplied with
power via the following supply modules:
MPA electronic module Permitted supply modules
(type)
VMPA1−FB−EM S −...
VMPA2−FB−EM S −...
(in each case without elec
trical isolation)
System supply
CPX−GE−EV− S (M18 4−pin) or
System supply
CPX−GE−EV− S −7/8− 4POL
(7/8" 4−pin)
VMPA1−FB−EM G −...
VMPA2−FB−EM G −...
(in each case with electrical
isolation)
Valve supply modules
CPX−GE−EV− V .. (M18 or 7/8") or
System supply modules
CPX−GE−EV− S .. (M18 or 7/8")
1)
Intermediate electrical supply mod
ule (supply plate (electric) type
VMPA−FB−SP−...−V−...)
1)
If a 4−pin system supply module is used, the electrical isolation
will no longer be effective.
Tab.1/3: Permitted supply modules modules for MPA elec
tronic modules
In the case of MPA electronic modules with electrical isolation
type VMPA1−FB−EM G −... or VMPA2−FB−EM G −... , V
EL/SEN
and
V
VAL
are completely electrically isolated. In conjunction with
the following voltage supply modules, it is therefore possible
to switch off the valve supply voltage at all poles:
Manifold sub−base with valve supply type CPX−GE−EV−
V
..
(M18 or 7/8")
7/8" manifold sub−base with 5−pin system supply module
type CPX−GE−EV
− S−7/8− 5POL
Intermediate electrical supply module (supply plate (elec
tric) type VMPA−FB−SP−...−V−...)