Wall mounting/H-rail mounting
Fig. 15: Disassembly from the H-rail
•
Lift the sensor and tilt it forward.
Plate mounting
Fig. 16: Disassembly from the wall
•
Loosen the screws and remove the sensor.
12
Technical data
12.1
Technical data, general
SOPA-…
-M-…-2P -M-…-2N -M-…-
PNLK
-C
General
Certification
RCM Mark, c UL us - Recognized (OL) 1)
1)
CE marking
Declaration of Conformity
Input signal/measuring element
Detected variable
Distance
–
Measurement principle
pneumatic
–
Sensing range
[µm]
20 … 200
2)
Operating pressure
[MPa]
–
0.4 … 0.7
[psi]
–
58 … 101.5
[bar]
–
4 … 7
Supply pressure
[MPa]
0.08 … 0.16
–
[psi]
11.6 … 23.2
–
[bar]
0.8 … 1.6
–
Nominal pressure
[MPa]
0.12
0.5
[psi]
17.4
72.5
[bar]
1.2
5
Operating medium
Compressed air in accordance with
ISO 8573-1:2010 [7:4:4]
Temperature of medium
[°C]
0 … +50
Ambient temperature
[°C]
0 … +50
Output, general
Repetition accuracy of switching point
–
Sensing range
30 µm … 150 µm
[µm]
± 2.5
–
–
Sensing range
20 µm … 200 µm
[µm]
± 5
–
Switching output
Switching output
2 x PNP
2 x NPN
PNP/NPN,
switchable
–
Switching function
–
OutA
Threshold value comparator with vari-
able hysteresis
–
–
OutB
Threshold value compa-
rator with variable hyste-
resis
–
–
–
OutC
Window comparator
–
Switching element function
N/C contact or N/O contact, switchable
–
Temperature coefficient of
the switching point per 10 K
[%]
typ. 2
–
Switch-on time
–
Output current
[mA]
£
100
–
Voltage drop
[V]
£
1.5
–
SOPA-…
-M-…-2P -M-…-2N -M-…-
PNLK
-C
Analogue output
Analogue output
–
SOPA-…-V
–
–
0 … 10 V
–
–
SOPA-…-B
–
–
1 … 5 V
–
–
SOPA-…-A
–
–
4 … 20 mA
–
Distance characteristic curve
start value
–
–
0
–
Distance characteristic curve
end value
–
–
300
–
Rise time
[ms]
–
–
£
22
–
Load resistance of current output
–
SOPA-…-A
[Ω]
–
–
£
500
–
Min. load resistance of voltage output
–
SOPA-…-V
[kΩ]
³
20
–
Output, additional data
Short circuit current rating
yes
Overload protection
present
Electronic
Rated operating voltage
[V DC]
24
Operating voltage
[V DC]
15.0 … 30.0
20.0 … 30.0
22.8 … 26.4
No-load supply current
[mA]
£
50
£
10
Reverse-polarity protection
for all electrical connections
Electromechanics
Connection type
Plug
Connection technology
M12x1 A-coded
Number of pins/wires
5
Tightening torque
[Nm]
0.3
Cable length
[m]
£
30
[m]
£
20 (for IO-Link)
Mechanical system
Mounting position
any
3)
Nominal diameter of meas-
uring nozzle
[mm]
2
Specified measuring nozzle
diameter
[mm]
1.5/2/2.5
Pneumatic port
QS-6
Tube length
[m]
0.5 … 8
Materials
Housing
Reinforced PA
Reinforced
PA/
anodised
aluminium
Keypad
PA6
PET
Inspection window
PA
–
Sealing ring
HNBR, FPM, NBR
HNBR, NBR
Adapter plate SXE3-W
–
–
–
Chromated
steel
Display, operation
Display range InA/InB
(distance)
0 … 500, dimensionless
Display range InC
(supply pressure)
4)
[bar]
0 … 2
Setting range threshold value
OutA/OutB (distance)
20 … 300, dimensionless
Setting range threshold value
OutC (supply pressure)
4)
[bar]
0.5 … 1.9
Setting range hysteresis
OutA/OutB (distance)
3 … 20, dimensionless
Hysteresis OutC
(supply pressure)
4)
[bar]
0.05
Immission, emission
Storage temperature
[°C]
–20 … +80
Degree of protection
IP65 (in accordance with EN 60529)
Internal air consumption
[Nl/min]
–
–
–
typ. 4.5
Measuring air consumption
(sense)
[Nl/min]
typ. 15 (per measuring module)
–
Exhaust air consumption
(clean)
[Nl/min]
typ. 35 (per measuring module)
–
Protection class
III (in accordance with DIN VDE 0106-1)
Shock resistance
30 g acceleration with 11 ms duration (half-sine)
(in accordance with DIN EN 60068 Part 2-27)
Vibration resistance
5 g acceleration at 10 … 150 Hz / 35 mm
(in accordance with DIN EN 60068 Part 2-6)
1) type-specific
è
Identification on the product
2) When using a single sensor module with precision pressure regulator (0.12MPa/18psi/1.2bar), a sensing
range of up to 400 µm is possible.
3) Condensate must not accumulate in the sensor module.
4) Value is only shown in bar in the display.
Tab. 20: Technical data, general
