Festo SFC-LAC CO Series, Руководство пользователя

Страница: 94 / 328

5. Commissioning
5−4
Festo P.BE−SFC−LAC−CO−EN en 0708NH
5.1 Preparations for commissioning
Warning
There is a danger of injury.
Electric axes can move suddenly with high force and at
high speed. Collisions can lead to serious injury to human
beings and damage to components.
·
Make sure that nobody can reach into the operating
range of the axes or other connected actuators (e.g. by
means of a protective screen) and that no objects lie in
the positioning range while the system is still connected
to a power supply.
For commissioning, the mechanical layout must be configured
(type of drive) and a dimensional reference system must be
defined (see also Tab.1/2). By means of the dimensional
reference system, all positions are defined and movement
can be made to them, e.g. with a position record from the
position record table.
·
Carry out parametrizing and commissioning by means of
the control panel or FCT, as described in the following
chapters and in the FCT/PlugIn help.
·
Check the presettings in the [Diagnostic] menu.
·
Upon completion of commissioning, note the instructions
for operation in the FCT/PlugIn help and in section 5.7.