Festo SFC-LAC CO Series, Руководство пользователя

Страница: 88 / 328

4. The control panel (only type SFC−LAC−...−H2−...)
4−18
Festo P.BE−SFC−LAC−CO−EN en 0708NH
4.5.7 [Settings] [Password edit]
In order to prevent unauthorized or unintentional overwriting
or modification of parameters in the device, access via the
control panel can be protected by a (local) password. No
password has been preset at the factory (presetting = 000).
·
Keep the password for the SFC−LAC in a suitable place,
e.g. in the internal documentation for your system.
If, in spite of care being taken, the active password for the
SFC−LAC is lost:
If necessary, the password can be deleted with a master
password. In this case please contact your Festo Service
partner.
Setting up a password
Select [Password edit] in the menu [Settings]:
Enter a password with 3 digits. The current entry position is
marked with a question mark.
1. Use the arrow keys to select a digit 0
Ū
9.
2. Confirm your entry with <Enter>. The next entry position
will be displayed.
3. After entering the thirddigit, save your setting with SAVE
<Enter>.
Enter password
As soon as a password is active, it will be scanned automati
cally when the menu commands [Positioning], [Settings] or
[HMI control] are accessed.
1. Use the arrow keys to select a digit 0
Ū
9.
2. Confirm your entry with OK <Enter>. The next entry
position will be displayed.
New Password:
[ ? x x ] = 0
ESC <Menu>
EDIT <––> SAVE <Enter>
Enter Password:
[ ? x x ] = 0
ESC <Menu>
EDIT <––> OK <Enter>