Festo SFC-LAC CO Series, Руководство пользователя

Страница: 51 / 328

3. Installation
3−5
Festo P.BE−SFC−LAC−CO−EN en 0708NH
If non−assigned plug connectors are touched, there is a
danger that damage may occur to the SFC−LAC or to other
parts of the system as a result of ESD (electrostatic dis
charge). Place protective caps on unused terminal connec
tions in order to prevent such discharges.
The plug connectors on the following Festo cables comply
with protection class IP54 when properly fitted.
Connection Cables/plugs Type Length [m]
1
Control interface Field bus plug FBS−SUB−9−BU−2x5POL−B
Field bus adapter FBA−2−M12−5POL
2
Voltage supply Supply cable KPWR−MC−1−SUB−15HC−... 2.5 / 5 / 10
(max. 10 m)
4
Motor connection (HME) Motor cable KMTR−LAC−S50HC−S50HC−... 2,5 / 5 / 10
(max. 10 m)
5
Parametrizing interface Programming cable KDI−MC−M8−SUB−9−... fix 2.5 m
Tab.3/2: Overview of cables and plugs (accessories)
For complying with the IP protection class:
·
Tighten the union nuts/locking screws on the plugs by
hand.
·
Seal unused M8 connections with type ISK−M8 protective
caps (accessories).
Observe the permitted tightening torques specified in the
documentation for the cables and connectors used.
Festo plugs which comply with protection class IP20:
screw terminal adapter type FBA−1−SL−5POL,
field bus plug FBS−SUB−9−WS−CO−K.