Festo SFC-DC series, Руководство пользователя

Страница: 34 / 202

1. System summary
1−16
Festo P.BE−SFC−DC−IO−EN en 0801a
1.3 Commissioning options
You can parametrize and commission the SFC−DC as follows:
directly on the control panel (only type SFC−DC−...−H2−...)
via the RS232 interface (with FCT software).
The SFC−DC can also be parametrized and commissioned with
the Command Interpreter via the RS232 interface. The CI
commands listed in the Object Directory can be transmitted
to the SFC−DC with all commercially−available terminal pro
grams. Only experienced users may use the CI commands.
For further information, see Appendix B.
Functions Control
panel
FCT
Parametrizing Selection of the axis type of the SLTE and the
associated axis parameters
Uploading/downloading configuration data
Saving different configurations in projects
x x
x
x
Position sets Compiling a position set table with set number,
target position, positioning mode, positioning
speed, acceleration, deceleration
x x
Commissioning Reference travel
Teaching of positions
Moving in individual steps
Starting and stopping positioning procedures during
commissioning
Expanded test functions, e.g. status displays
Testing or demonstrating the position sets
x
x
x
(x)
x
x
x
x
x
x
x
Diagnosis/Service Reading and displaying diagnostic data x x