Festo SDE3 series, Руководство по эксплуатации

Страница: 40 / 60

SDE3−...
Festo SDE3−... 0604a English
40
Symbols on the display
Display Symbol Description
RUN mode: Switching output set/not set
SHOW and EDIT modes: Switching output
selected/not selected
Threshold value comparator
Window comparator
[SP] Switching point
[SP] [min] Lower switching point (switching point min)
[SP] [max] Upper switching point (switching point max)
[HY] Hysteresis
[NO] Switching characteristic of normally open
contact
[NC] Switching charact. of normally closed contact
[min] / [max] Extreme values: Minimum/maximum input
measured value (In A/B)
1)
[Teach] Teach mode active
[Option] Option (On/Off ) measured value smoothing
on/off
[Lock] Security code active (blocked against
unauthorized parametrizing)
Special menu (SPEC) is active
1)
RUN mode: Graphic display of the current
measured value related to the maximum
measured value of the measuring range.
The left−hand segment row shows the measured
value of In A, the right−hand segment row shows
the measured value of In B (only with SDE3−..−D).
Meaning in other modes see Fig.12.
1)
The segment bars also show special symbols (see Fig.12).
Fig.11