Festo SBSC-EN, Руководство пользователя

Страница: 270 / 365

Page 270 Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Vision Sensor Manual
5.6.3.8 Set the name with TIA interface
To set the name of SBS from TIA interface there are two options.
5.6.3.8.1 Generate name automatically
The Profinet name of the SBS can be generated automatically from the PLC. Option: „Generate Profinet
device name automatically“ takes the name from the project. This name originally comes from the GSD-
file.
5.6.3.8.2 Set name manually
If the option „Set PROFINET device name using a different method“ is selected any name can be set.
Information: In the field „Converted name“ a different name may be shown than the one edited, as with
Profinet not all characters can be used a conversion may be necessary and is done automatically. (names
must be DNS compatible, s. also chap. 3.2)
If a name for the SBS is setz via this option, in each case it must be written tot he sensor with the „Assign
PROFINET device name“- Tool (as described in chap. 4.9)
The Profinet name in the project and in the SBS must be the same.
Fig. 284: Set name in project
5.6.3.9 Write name into SBS
In case that the Profinet name in the SBS has to be updated, it´s necessary to write the name into the
sensor to establish a communication.
This is done with the tool: Online/Assign PROFINET device name. Select the device in the list (SBS ) and
with „Assign name“ the name is written into the sensor.