Festo SBOC-M-R1B-H, Руководство пользователя

Страница: 34 / 88

2. Mounting
2-6
Festo GDCS-SBOC-EN en 1602a
2.1.4 Mounting/dismantling of lens and protective tubing
Note
Handle the protective tubing and lens with care.
Avoid contamination. Work in a clean environment.
Do not touch the inside of the camera, the lens element
of the lens or the glass surface of the protective tubing.
Mounting the lens without protective tubing
1. If applicable, remove the protective cover on the lens and
on the camera housing.
2. Carefully guide the lens into the fixture of the camera
housing and screw it in clockwise by hand.
Mounting the lens with protective tubing
1. Before mounting: Check the seals for proper seating on
the support ring (see Fig. 1/2,
1
).
2. Carefully screw the support ring of the protective tubing
clockwise by hand into the fixture of the camera housing.
3. Now carefully guide the lens into the fixture of the sup­
port ring and screw it in clockwise by hand as well.
4. Carefully guide the shield tube (see Fig. 1/2,
2
) over the
lens and screw it clockwise by hand into the support ring.