Festo SBO***-Q Series, Руководство пользователя

Страница: 78 / 256

4. Commissioning
4-16
Festo P.BE-SBO-Q-EN en 1602e
4.7 Settings on the Compact Vision System
1. In CheckKon, open the “Live Image” window.
2. Activate the transfer and display of the camera image by
clicking on this button.
3. If necessary, activate the display of the camera image by
clicking on this button also.
The camera image corresponds to the image captured by the
Compact Vision System, taking into account the system para­
meters set.
4. If necessary, switch on the Dynamic Help.
In the “Live Image” window, you will then receive help in
setting the image and lighting control parameters.
Now perform the following steps:
1. Switch the lighting on and direct it towards the check
area.
If the lighting is controlled by the device, set the system
parameters for the lighting control appropriately.
2. Roughly adjust the following image parameters until an
image of the check area can be identified:
– Image field area (change the area displayed using the
mouse or by inputting the parameters)
– Exposure time
– Sensor amplification
3. Place a check part in the check area, as for operation.
4. Now perform a fine adjustment of the camera mounting
position, if necessary. The Compact Vision System is
optimally positioned in relation to the check part when
the part is in the centre of the camera image.