Festo MS6 SV E 10V24 Series, Руководство по эксплуатации

Страница: 34 / 38

34 Festo — MS6(N)-SV-...-E-10V24 — 2021-11e
Technical data
12.7.2 Switching characteristics for multi-pin plug socket NECA-S1G9-P9-MP3/-MP5
1
2
3
4
5
6
7
8
Fig. 23: Input and output switching characteristics in normal operation (when automatic start mode of
operation is set) for multi-pin plug socket NECA-S1G9-P9-MP3/-MP5
1 Operating pressure p1
2 Outlet pressure p2
3 +L1: operating voltage
4 EN1: Enable signal 1 5 EN2: Enable signal 2
6 Signal contacts
7 Power LED (green)
8 Error LED (red)
Exhausting and output of an error message at NECA-…-MP3:
–
EN1 and EN2 = 0 V (LOW)
–
EN1 and EN2 = 24 V (HIGH)
Exhausting and output of no error message at NECA-…-MP5:
–
EN1 and EN2 = 0 V (LOW)
–
EN1 and EN2 = 24 V (HIGH)
The following diagrams shows the exact switching characteristics of the Enable signals EN1 and EN2
with time offset. The maximum reaction time can be derived from the delay between the two signals.