Festo MPS PA, Руководство по эксплуатации

Страница: 47 / 68

Bottling Learning System Commissioning
© Festo Didactic 696690
47
Procedure
•
Connect the sockets Q4 and GND of the downstream station to the sockets I6 and GND of the upstream
station
Further MPS-PA stations are connected to each other according to the same principle.
Figure 26: Communication connection between 19
″
frames on several MPS-PA stations
Combination of MPS with MPS-PA
If the Bottling Station is combined with MPS stations (for example MPS 403-1), the bottle feed and its
onward transport can be established via communication links.
In the example, the Bottling Station is coupled with the MPS-D Distributing/Conveyor, Joining, and Sorting
stations. The “PA tanks” (554301) are used as the workpiece.
Figure 27: MPS and MPS-PA combination
Bottles are transported from the Distributing/Conveyor station to the Bottling station and filled there. They
are then transported to the Joining station and covered. At the end, sorting takes place in the slides.