Festo MPA-L Series, Описание

Страница: 13 / 160

Contents and general safety instructions
XI
Festo P.BE−MPAL−EN en 1008NH
Terms and abbreviations
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
Blanking plate Plate without valve function for sealing vacant valve positions on
sub−bases (vacant position).
Cartridge fitting Plug connector for connection of the power supply cables to the valve
terminal
Components Common term for pneumatic interface, multipin sub−base, exhaust
plate, silencer, pneumatic sub−base or pneumatic supply plate, end
plate, pressure regulator plate, solenoid valve and cover plate
Electronics module Module in the sub−base with an LED and solenoid coil management
End plate Extreme right−hand plate with/without connections for power and
pilot pressure and exhaust air, and extreme left−hand plate with multi−
pin plug connection and CPX terminal as well as holes for H−rail and
wall mountings.
Exhaust plate Plate for ducted exhaust with connection 3/5
MO Manual override
MPA1 Sizes of the solenoid valves: MPA1 = 10 mm wide
Multi−pin plug connection Electrical connection for controlling the valve terminal MPA−L
Pneumatic interface The pneumatic interface is the interface between the modular
electrical peripherals of the CPX terminal and the MPA−L pneumatics
Pneumatic module Module consisting of pneumatic Sub−base, electronics module,
solenoid valves or cover plates
Solenoid valves Monostable solenoid valve with a solenoid coil, double−solenoid or
mid−position valves with two solenoid coils and additional variants
Sub−base Plate with working lines 2 and 4 for the mounting of valves and verti
cal stackings
Supply plate Plate for (additional) supply of compressed air to the solenoid valves,
e.g. with several pressure zones.