Festo MPA-ASI Series, Руководство пользователя

Страница: 171 / 208

A. Technical appendix
A−3
Festo P.BE−MPA−EN en 0802c
A.1 Technical specifications
Note
The valves can be used at temperatures down to −5 °C.
In order to prevent the condensate and the humidity from
freezing, we recommend that you fit a dryer with which
condensate and humidity can be removed.
General information
Permitted temperature range
Long−time storage
Operation
Medium −20
Ū
+40 °C
−5
Ū
+50 °C
−5
Ū
+50 °C
Protection class as per EN 60529 IP65 (with cable from Festo
accessories)
Relative humidity 90 % at 40 °C
Protection against corrosion
KBK1 (as per FN 940070)
Assembly position as desired, with hat rail fitting only
horizontal
Tightening torques (M
A
)
Electronic modules on sub−bases
Proportional pressure regulator on sub−base
Exhaust plates on pneumatic supply plate, multipin
sub−base or pneumatic interface
Large surface−mounted silencer on pneumatic supply
plate, multipin sub−base or pneumatic interface
Fastenin gof sub−bases or electric supply plates (linking)
Board in multipin sub−base
Multipin connection
Support bracket on sub−bases or supply plates
Locking screw of the hat−rail clamping unit
0.32
Ū
0.48 Nm
1.80
Ū
2.20 Nm
0.59
Ū
0.71 Nm
0.90
Ū
1.10 Nm
1.62
Ū
1.98 Nm
0.90
Ū
1.10 Nm
0.59
Ū
0.71 Nm
1.62
Ū
1.98 Nm
1.30 Nm
MPA1 MPA2
Components on sub−bases (valve, cover plate and
vertical stacking)
0.20
Ū
0.30 Nm 0.59
Ū
0.71 Nm