Festo — CPX-AP-A-EC-M12 — 2022-07
Commissioning
9
Connection for EtherCAT network [OUT XF2]
Socket M12, 4-pin, D-coded
Signal
1
RD+
Received data +
2
TD+
Transmitted data +
3
RD–
Received data –
4
TD–
Transmitted data –
Thread
Shield Functional earth FE
Tab. 8: Connection for EtherCAT network [OUT XF2]
5
Mounting
•
Carry out assembly according to the "Automation system CPX-AP-A operating instructions"
6
Installation
•
Carry out installation according to the "Automation system CPX-AP-A operating instructions"
•
EtherCAT Use network cables as described in the cable specification
7
Commissioning
NOTICE
Unauthorised Access to the Device Can Cause Damage or Malfunction.
• When connecting the device to a network, protect the network from unauthorised access.
Standards for security in information technology can be used for network protection measures, e.g.
IEC 62443, ISO/IEC 27001.
1. Set up an automation project for the higher-order controller using suitable software.
2. Load the device description file into the software
3. Configure the automation system CPX-AP in the software:
–
System structure
–
Network addressing
–
Address assignment of modules
è
Instruction manual for automation system CPX-AP
4. Upload the automation project to the higher-order controller.
Response of the display components of the module after error-free commissioning
[MD]
[SD]
[PL]
[MT]
green light
green light
green light
off
Tab. 9: Response of the display components after error-free commissioning
Содержание EtherCAT CPX-AP-A-EC-M12
Страница 1: ...CPX AP A EC M12 EtherCAT interface Operating instruc tions 8160774 2022 07 8160776 ...
Страница 43: ......