Festo EtherCAT CPX-AP-A-EC-M12, Руководство по эксплуатации

Страница: 5 / 44

Festo — CPX-AP-A-EC-M12 — 2022-07
Product overview
5
2 Safety
2.1 Safety instructions
–
Only use the product if it is in perfect technical condition.
–
Observe the identifications on the product.
–
Store the product in a dry environment protected from UV and corrosion. Keep storage times short.
–
Before working on the product, switch off the power supply and secure it against being switched on
again.
2.2 Intended use
The product described in this document is intended exclusively for operation as an interface between
an automation system CPX-AP-A and a higher-order controller by integration in a EtherCAT network.
Use the product only as follows:
–
Use only in an industrial environment. Outside industrial environments, e.g. in commercial and
residential/mixed-use areas, it may be necessary to take measures to suppress radio interference.
–
Use only in combination with modules and components that are approved for the applicable
product variant
è www.festo.com/catalogue.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can evaluate the work
and detect dangers. The qualified personnel have skills and experience in dealing with electrical
(open-loop) control technology.
3 Additional information
–
Contact the regional Festo contact if you have technical problems è www.festo.com.
–
Accessories and spare parts
è
www.festo.com/catalogue.
4 Product overview
4.1 Function
The product, installed as a station in an EtherCAT network, establishes the connection between a
higher-order controller and the modules of an automation system CPX-AP.
Device description file
A device description file (ESI file) is used for project engineering in the EtherCAT interface of the
higher-order controller software.
It contains all the information required for parameterisation of the automation system CPX-AP-A via
control software.
The device description file is available at the Festo Support Portal è www.festo.com/sp.
Crossover detection (auto MDI/MDI-X)
The product supports crossover detection (auto MDI/MDI-X), which means that there is the option of
using patch cables or crossover cables.