Festo EtherCAT CPX-AP-A-EC-M12, Руководство по эксплуатации

Страница: 26 / 44

26 Festo — CPX-AP-A-EC-M12 — 2022-07
Diagnostics and fault clearance
ID hex (dec) Message Description
08 | 01 | 0134
(134283572) AP master toggle bit
error Diag-
nostic
status Error
08 | 01 | 01A4
(134283684) Device variant mis-
match The currently set device variant does not match with the
system configuration. The device variant is automatically
set to the system configuration.
Remedy
–
In case that the device variant is not set
automatically, set the device variant to the
value configured for the system.
Diag-
nostic
status Information
08 | 01 | 01AD
(134283693) System state change
to OPERATION failed The AP device did not change the system state from CON-
FIGURATION to OPERATION.
Remedy
–
Restart system
–
Update firmware to latest version
–
Contact Festo service
Diag-
nostic
status Warning
08 | 01 | 01C4
(134283716) AP Module(s)
detected One or more new AP module(s) were detected in the
system.
Remedy
–
None
Diag-
nostic
status Information
08 | 01 | 01FF
(134283775) Device not ready A device is delaying the startup excessively long.
Remedy
–
Contact Festo Support
Diag-
nostic
status Error
08 | 01 | 0215
(134283797) Device forced to com-
munication loopback The device was forced by the master to set the loopback
on the communication port, due to commnuication errors.
Communication to subsequent modules is thereby inter-
rupted.
Remedy
–
Check wiring